Bosch MUM6N10UC - Manual (Page 24)

24
TROUBLESHOOTING
Problem Possible Cause and Remedy
The power unit does not start if you
use the bowl and attachments. The motor drive cover is not on the high-speed drive.
z Put the cover on its place.
The power unit stops while working. The safety cutout to protect the motor against
overheating has switched off the power unit.
z Turn the power unit to the “off” position “0/off”
and unplug.
z Allow it to cool down for 15 minutes.
The blender does not work. The blender cover is not closed completely.
z Close the cover completely.
The blade has become blocked by the contents.
z Turn the power unit to the “off” position “0/off”
and unplug.
z Remove the blender and pour the content into
a suitable container.
The blender stops while working. The blender jar or the blender cover is not attached.
z Turn the blender jar /blender cover
counterclockwise until it is firmly seated.