Bosch MUM6N10UC - Manual (Page 20)

20
How to Use Blender
The blender has been designed for crushing
ice; mixing liquids; pureeing vegetables;
preparing special diet and infant foods;
pulverizing fruit, vegetables, nuts and dried
bread (for bread crumbs); and preparing
mayonnaise and sauces.
Before beginning to use this or any other
attachment, make sure that the power unit is
on a clean, smooth, suitable work surface
and switched to Off position “0/off”, and that
you have removed the motor drive cover.
1. Before using the blender for the first
time, it is recommended that the
blender jar cover, closure/funnel and
blade/base assembly be washed.
All components, except the blade/
base assembly, are dishwasher safe.
Remove the blade/base assembly
from the blender, see figure 9.
The blade/base assembly may be easily
removed by inverting the blender and using
the blender cover to fit over the tabs on the
blade/base assembly.
Turn it counterclockwise until it stops, see
figure 10a, and then lift up, figure 10b.
Figure 10
2. To assemble or reassemble blade/
base assembly into the blender, insert
the blade/base assembly into the
blender jar and press down on the
blade/base assembly. Turn clockwise
to the stop, see figure 11.
The blade/base assembly is then back
in place.
Figure 11
3. If you have not already done so,
move the motor drive cover to the
high-torque drive. See figure 12.
Figure 12
m
CAUTION
m
Blade/base assembly is very sharp.
Handle with care.