beautypg.com

Options programming – Autostart CT-5000 User Manual

Page 11

background image

CT-5000 Installation Guide P.11

The Parking Lights and the Siren will flash and chirp once, twice or 3 times to confirm

entry into a Mode.


3. Release the Brake Pedal.

Table 2

The Module can only be programmed Function by Function. After selecting a Mode
(from 1 to 3), you will be taken to the first Function of that Mode. After entering an Option
number for Function 1, you will be automatically taken to Function 2, and so on; therefore, be
ready to re-enter all option numbers for all functions of the Mode you are accessing. You
may not skip Functions.

For each Function, select one of the four Options by pressing the corresponding
button on the Transmitter:

LOCK

for

Option

1,

UNLOCK

for Option

2,

TRUNK

for Option

3,

or

START

for

Option 4.

Table 3

Once an Option has been selected the Parking Lights will flash 1, 2, 3 or 4 times depending
on the selected Option. At any time, you can press the Brake Pedal to return to the
Programming Centre (Programming Modes and Tach Programming).

Options Programming

Mode 1

*indicates default setting

Function 1 – Ignition-Controlled Door locks

OPTION 1*

Ignition Lock

DISABLED

OPTION 2

Ignition Lock

ENABLED

OPTION 3

Ignition

UNLOCK

ONLY

OPTION 4

Ignition

LOCK

ONLY

Function 2 – Secure Lock

OPTION 1*

Secure Lock disabled (1-sec. Disarm pulse.)

OPTION 2

Secure Lock enabled in Smart Mode.

OPTION 3

Secure Lock disabled (0.5 Sec Disarm pulse)

OPTION 4

Secure Lock enabled in Normal Mode.

Function 3 – Door Locks Pulse Timing

OPTION 1*

7/10 Second Lock/Unlock pulses.

OPTION 2

4 Seconds Lock/Unlock pulses.

OPTION 3

7/10 Seconds Lock pulse and two 1/4 second unlock pulses.

OPTION 4

1/10 Second Lock/Unlock pulses.

Function 4 – AUX 3 Programming

OPTION 1*

Constant while the

TRUNK

button is pressed

OPTION 2

1-sec. Trunk 1 output when

TRUNK

button pressed for 3 sec. while Ignition is

OFF

and Data output.

OPTION 3

TRUNK

with Disarm/Rearm (Shock is ignored while Zone 3 is opened.)

OPTION 4

TRUNK

1 sec output

ON/OFF

Function 5 – AUX 2 Programming

OPTION 1*

Priority Door access (Pressing

UNLOCK

a 2

nd

time triggers

AUX 2

)

Car Finder enabled (pressing

LOCK

and

UNLOCK

triggers Car Finder)

The Driver’s Door unlocks upon the 1st pressing of the

UNLOCK

button;

All Doors unlock on any subsequent pressing of the

UNLOCK

button.

OPTION 2

Toggle

ON/OFF

with a 30-second timeout (press

LOCK

and

UNLOCK

)