Ampro Corporation 420 - Manual (Page 14)

Chapter 2 Product Overview
8 Reference Manual CoreModule 420
• Video (LCD/CRT) Display
Enhanced 2D graphics controller
♦ Supports BitBLT implementation for all 256 raster operations for Windows
® support
♦ Supports all BLT transparency modes
• Bitmap transparency
• Pattern transparency
• Source transparency
• Destination transparency
♦ Supports 8, 16, 24, and 32-bit pixel depths
♦ Supports hardware clipping
♦ Supports fast line draw engine with anti-aliasing
♦ Supports fast triangle fill engine
♦ Supports 4-bit alpha blend font for anti-aliased text display
♦ Supports 64-bit wide pipelined architecture operating at 100 MHz
♦ Supports complete double buffered registers for pipelined operation
♦ Provides video memory up to 4 MB – selected in BIOS Setup
CRT Interface
♦ VGA Controller with 135 MHz triple RAMDACs for 1280 x 1024 x 75 Hz display
♦ Supports 24-bit pixel depth
♦ Interlaced or non-interlaced output
LCD/TFT Interface
♦ Supports VESA Flat Panel Display interface FPDI-1B
♦ Supports programmable panel size up to 1024x768 pixel display resolution
♦ Supports VGA and SVGA active matrix TFT flat panels
♦ Support internal CRT controller for display mode settings
♦ Supports 9-, 12-, and 18-bit interface (1 Pixel/Clock)
♦ Supports 2x9-bit interface (2 Pixels/Clock)
♦ Supports programmable image position
♦ Supports 3.3V or 5V LCD panels; jumper selectable
♦ Provides Video BIOS customization tools
• Miscellaneous
♦ Provides Real Time Clock and CMOS RAM, with support for battery-free operation
♦ Provides General Purpose I/O (GPIO) interface
♦ Supports Oops! Jumper (BIOS Recovery)
♦ Supports Serial Console (Console Redirection)
♦ Supports customizable Splash Screen
♦ Supports Watchdog Timer (WDT)