Canon PowerShot ELPH 150 IS - Manual (Page 85)

85
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Still Images Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC90 (sold separately)
eliminates the need to monitor the remaining battery level.
1
Make sure the camera is off.
2
Open the cover.
z z
Follow step 1 in “Inserting the Battery
Pack and Memory Card” (
=
12 ) to
open the memory card/battery cover, and
then open the coupler cable port cover
as shown.
3
Insert the coupler.
z z Insert the coupler facing the direction
shown, just as you would a battery pack
(following step 2 in “Inserting the Battery
Pack and Memory Card” (
=
12 )).
z z Make sure the coupler cable passes
through the port.
Terminals
Coupler Cable Port
4
Close the cover.
z z Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
5
Connect the power cord.
z z
Insert the adapter plug into the end of the
coupler cable.
z z
Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
z z Turn the camera on and use it as desired.
z z When finished, turn the camera off and
unplug the power cord from the outlet.
•
Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
•
Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.