Canon PowerShot D20 - Manual (Page 16)

Initial Preparations
16
Adjust the date and time as follows.
Access the camera menu.
z Press the n button.
Choose [Date/Time].
z Press the zoom buttons to choose the 3 tab.
z Press the op buttons to choose [Date/
Time], and then press the m button.
Change the date and time.
z Follow step 2 on p. 15 to adjust the settings.
z Press the n button to close the menu.
• Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
• To set daylight saving time (1 hour ahead), choose in step 2 and then
choose by pressing the op buttons.
Changing the Date and Time
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a charged
battery or connect the camera to an AC adapter kit (sold separately, see
Camera User Guide), even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be displayed
when you turn the camera on. Follow the steps on p. 15 to set the date and time.
• Automatic date and time updating is possible using GPS (see Camera User
Guide).
EC320_GS-EN_Web.book Page 16 Wednesday, February 15, 2012 2:53 PM
COP
Y