Canon EOS Rebel SL1 18-55mm IS STM Lens Kit - Manual (Page 84)

84
Just by tapping the LCD monitor screen, you can focus and take the
picture automatically. This works in all shooting modes.
1 Display the Live View image.
Press the button.
X
The Live View image will appear on
the LCD monitor.
2 Enable the touch shutter.
Tap [y] on the screen’s bottom left.
Each time you tap the icon, it will
toggle between [y] and [x].
[x] (Touch shutter: Enable)
You can focus and shoot by tapping
the screen.
[y] (Touch shutter: Disable)
You can tap to select where you want
to focus. Press the shutter button
completely to take the picture.
3 Tap the screen to shoot.
Tap the face or subject on the screen.
X
At the point you tap, the camera will
focus in the AF method that was set
(p.77-83). When [FlexiZone - Multi]
is set, it will switch to [FlexiZone -
Single].
X
When focus is achieved, the AF point
turns green and the picture is taken
automatically.
If focus is not achieved, the AF point
turns orange and the picture cannot
be taken. Tap the face or subject on
the screen again.
x Shooting with the Touch Shutter
COP
Y