Canon EOS Rebel T3 18-55mm IS II Lens Kit - Manual (Page 83)

83
In Basic Zone modes, the camera will normally focus the closest subject
automatically. Therefore, it might not always focus your target subject.
In the , , , and modes, you can select the AF
point and use it to focus the target subject.
1
Press the <S> button. (9)
X The currently-selected AF point will
be displayed on the LCD monitor and
in the viewfinder.
2
Select the desired AF point.
Press the < S> key to select the AF
point.
While looking at the viewfinder, you
can select the AF point by turning the
<6> dial until the desired AF point
lights in red.
When all the AF points light up,
automatic AF point selection will be
set. The AF point will be selected
automatically to focus the subject.
Pressing < 0> toggles the AF point
selection between the center AF point
and automatic AF point selection.
3
Focus the subject.
Aim the selected AF point over the
subject and press the shutter button
halfway to focus.
S Selecting the AF Point N
COP
Y