Canon imagePROGRAF iPF8400 - Manual (Page 152)

Other Messages Other Messages
GARO Wxxxx (x represents a number) ............................................................................................................... 152
ERROR Exxx-xxxx (x represents a letter or number) .................................................................................... 152
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) .......................................................... 152
Top cover is open. ........................................................................................................................................................ 152
Prepare for parts replacement. .............................................................................................................................. 153
Parts replacement time has passed. .................................................................................................................... 153
Unknown file. .................................................................................................................................................................. 153
Calibration There is a problem with the multi-sensor. .................................................................................. 153
Multi-sensor error ......................................................................................................................................................... 153
GARO Wxxxx (x represents a number) GARO Wxxxx (x represents a number)
Cause Corrective Action
There is a problem with the print job. Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
ERROR Exxx-xxxx (x represents a letter or number) ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred. Write down the error code and message, turn off the printer, and contact your Canon
dealer for assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Cause Corrective Action
The last portion of roll paper was used during a print job. The paper was
not advanced because the trailing edge is taped to the roll. Turn off the printer and remove the roll from the printer before
restoring power.
Fastening tape or the Belt Stopper has not been removed inside the Top
Cover. Turn off the printer, open the Top Cover and remove the tape
or the Belt Stopper before restoring power.
An error requiring service may have occurred. Turn off the printer and wait at least three seconds before re-
storing the power.
If the message is displayed again, write down the error code
and message, turn off the printer, and contact your Canon
dealer for assistance.
Top cover is open. Top cover is open.
Cause Corrective Action
The printer has detected that the Top Cover is open. Open the Top Cover fully, remove any foreign objects, and close the Top Cover
again.
If the error occurs again, turn off the printer and wait a while before restoring power.
GARO Wxxxx (x represents a number) iPF8400
Basic Guide
Error Message
Other Messages
152