Other functions of wireless lan, P. 41), Cop y – Canon SELPHY CP900 User Manual
Page 41
41
Other Functions of Wireless LAN
Connecting to Other Access Points (Infrastructure Mode)
After connecting to an access point in infrastructure mode
, you can connect to another access point
as follows.
O
Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and press the
o
button.
O
Press the ud buttons to select [Access Point Connect], and then press the o button.
O
Specify as described on
p. 31
O
[Access Point Connect] is available only when the selected communication mode (below) is [Infrastructure].
Checking Setting Information
You can check connection settings such as the communication mode and channel, and printer information
such as the printer name and IP address.
O
Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and press the
o
button.
O
Press the ud buttons to select [Confirm Settings], and then press the o button.
O
Press the ud buttons to check setting information.
O
Press the v to go back.
Changing Communication Mode
You can change the communication mode
to connect to another device, or stop using wireless LAN.
O
Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and press the
o
button.
O
Press the ud buttons to select [Comm. Mode], and then press the o button.
O
Press the ud buttons to select a communication mode, and then press the o button.
O
Press the ud buttons to select [Disable Wireless LAN], and then press the o button to stop using
wireless LAN.
Changing the Printer Name
You can change the printer name
.
O
Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and press the
o
button.
O
Press the ud buttons to select [Other Settings], and then press the o button.
O
Press the ud buttons to select [Set Printer Name], and then press the o button.
O
Press the EDIT button to display the screen to enter characters and enter the printer name
.
Setting the IP Address Manually
You can specify the printer's IP address and subnet mask manually.
Display the settings screen.
O
Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and
press the o button.
O
Press the ud buttons to select [Other Settings], and then press the o button.
O
Press the ud buttons to select [IP Address Settings], and then press the o button.
O
Press the ud buttons to select [Manual], and then press the o button.
Set the IP address.
O
Press the lr buttons to select the position, press the ud buttons to set the value, and
then press the o button.
1
2
COP
Y