Canon PowerShot D20 - Manual (Page 162)

Adjusting Basic Camera Functions
162
Change the display language as needed.
Access the [Language] screen.
Choose [Language ], and then press the
m button.
Configure the setting.
Press the opqr buttons to choose a
language, and then press the m button.
The following settings can also be adjusted on the 3 tab.
• [GPS Settings] (p. 47)
• [Time Update] (p. 52)
• [Video System] (p. 171)
• [Ctrl via HDMI] (p. 169)
• [Eye-Fi Settings] (p. 190)
If you accidentally change a setting, you can restore default camera settings.
Access the [Reset All] screen.
Choose [Reset All], and then press the m button.
Restore default settings.
Press the qr buttons to choose [OK], and
then press the m button.
X Default settings are now restored.
Display Language
• You can also access the [Language] screen in Playback mode by pressing and
holding the
m button and immediately pressing the n button.
Adjusting Other Settings
Restoring Defaults
• The following functions are not restored to default settings.
- [Date/Time] (p. 21) on the 3 tab, [Language ] (p. 22), sounds registered in
[Sound Options] (p. 155), image registered in [Start-up Image] (p. 156), [Time
Zone] (p. 160), and [Video System] (p. 171)
- Custom white balance data you have recorded (p. 105)
- Colors chosen in Color Accent (p. 87) or Color Swap (p. 88)
- The shooting mode (p. 77)
- Logged location information and shooting date and time (p. 48)
COP
Y