Canon Color imageCLASS MF8280Cw - Manual (Page 15)

15
Connecting to the Computer
Preface Installing the Machine
2 1
Connecting to a Computer and Installing the Drivers
3
Configuring and Connecting the Fax
4
 Are the computer and the router properly
connected using a LAN cable?
For details, see the instruction manual provided with your
network device, or contact the manufacturer.
 Has the network settings on the computer been
complete?
If the computer is not properly configured, you may not
use the wired LAN connection even after completing the
following settings.
NOTE
• You cannot connect both the wired LAN and wireless
LAN at the same time.
• When you connect to a network environment that
is not security protected, your personal information
could be disclosed to third parties. Please use
caution.
• If you connect through a LAN in the office, contact
your network administrator.
If the IP address on this machine has been changed:
If the machine is on the same subnet as the computer,
the connection is maintained.
* If you want to manually configure the IP address:
If you have set a static IP address to the IP address of the
computer, manually configure a static IP Address.
“Setting IPv4 Address” in the e-Manual
“Setting IPv6 Address” in the e-Manual
Wait for approximately 2 minutes.
The IP address will be automatically configured.*
Internet Router
LAN Cable
1
Wired LAN Connection
Check the following first.
2
Wired LAN Connection
Connect the LAN cable.
The machine does not come with a LAN cable, router, or a hub. Have LAN Cable of Category 5 twisted pair cable or
higher ready.
Macintosh
Macintosh
Router
LAN Cable