Canon Wireless File Transmitter WFT-E4 II A - Manual (Page 14)

14
Setting the vertical-grip <ON/OFF> switch to <ON>
enables the vertical-grip shutter button and other
controls. These controls for shooting can still be used
even when batteries are not loaded in the transmitter.
The Hand Strap E1 (sold separately) is attached as shown in the figure.
Vertical Shooting Controls
Attaching the Hand Strap E1
1 4
2 5
3 6
After the hand strap is attached, check that all the slack at the buckle is removed and that there is no
looseness at the buckle even when pulled tight.
COP
Y