Canon LV-8320 - Manual (Page 13)

LV-8320 Basic Serial Command Specifications
-10-
6.10. Computer 2 Command
Command “C06” [CR]
Detail
Select Computer2 Input
Note 1) Although projector returns “OK”, Auto input is not executed with this
command while Auto input is set to On1 or On2.
Note 2) When “Monitor out” is selected in Terminal menu, projector returns “OK”
and displays “Monitor out” on the screen.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.11. Video Command
Command “C07” [CR]
Detail
Select Video Input
Although projector returns “OK”, Auto input is not executed with this command
while Auto input is set to On1 or On2.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.12. VOLUME + Command
Command “C09” [CR]
Detail
Volume Up.
This command operates the same way as “VOLUME+” button of the projector and
remote control.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.13. VOLUME – Command
Command “C0A” [CR]
Detail
Volume Down
This command operates the same way as “VOLUME-” button of the projector and
remote control.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.14. AUDIO MUTE ON Command
Command “C0B” [CR]
Detail
Sound Mute ON.
This command works the same way as “MUTE” button of the remote control for
Mute ON, but does not work for Mute OFF.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]