Canon LV-8320 - Manual (Page 12)

LV-8320 Basic Serial Command Specifications
-9-
6.5. POWER ON Command
Command “C00” [CR]
Detail
Power ON
When already Power is ON, nothing is done.
When sending this command during processing Countdown, Countdown is
terminated.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.6. POWER OFF Command (Quick Power OFF)
Command “C01” [CR]
Detail
Power OFF (Standby)
When Power is OFF with POWER button of the projector and remote control,
“Power OFF?” is displayed. However, as soon as this command is sent, Quick
Power OFF is executed.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.7. POWER OFF Command
Command “C02” [CR]
Detail
Power OFF (Standby).
The command operates the same Power OFF function as POWER button of the
projector and remote control.
Once this command is sent, “Power OFF?” is displayed. If this command is sent
again while it is displayed, Power OFF is executed.
When sending this command during Countdown, Countdown is terminated.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.8. HDMI Command
Command “C04” [CR]
Detail
Select HDMI Input
Although projector returns “OK”, Auto input is not executed with this command
while Auto input is set to On1 or On2.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.9. Computer 1 Command
Command “C05” [CR]
Detail
Select Computer 1 Input
Although projector returns “OK”, Auto input is not executed with this command
while Auto input is set to On1 or On2.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]