Canon XF305 - Manual (Page 2)

2
IMPORTANT
• Please observe the following precautions. Failing to do so may result in permanent data loss.
While a CF card is connected to the computer:
- Do not remove the CF card or the CF card reader.
- Do not access, change or delete any of the CF card’s folders or files directly from the computer. Always access
the files on the CF card only using the procedure described above.
When the camcorder is connected directly to the computer:
- Do not open any of the CF card slot covers and do not remove the CF cards.
- Do not disconnect the USB cable.
- Do not turn off the camcorder or the computer.
NOTES
• Use of a commercially-available, UDMA-compatible card reader is recommended.
• Depending on the system used (the computer’s performance specifications, transfer rate of the CF card, etc.),
transferring the clips can take some time.
• If you are using the Camera Import window to play back clips in the camcorder while it is connected to the
computer, playback may not be smooth and frames may be dropped. Remove the CF card from the camcorder,
insert the CF card into a card reader, connect the card reader to the computer, and then play back the clips.
Trademark Acknowledgements
• Apple, Mac OS and Final Cut Pro are trademarks of Apple Inc., registered in the U.S. and other countries.
• Other names and products not mentioned above may be trademarks or registered trademarks of their respective
companies.
PUB. DIE-0424-000A © CANON INC. 2012
The information in this manual is verified as of April 2012. Subject to change without previous notice.
COP
Y