American Standard Cadet w/ Integral Apron Whirlpool and Bathing Pool 2776.218W - Manual

H65
© 2008 AS America Inc.
CADET™ 5' x 32" w/INTEGRAL APRON
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Revised 2/08
CADET™ 5' x 32" with INTEGRAL APRON
WHIRLPOOL AND BATHING POOL
❏ 2776.218W Whirlpool featuring System I,
Left Hand Outlet
❏ 2776.118W Whirlpool featuring System I,
Right Hand Outlet
Product Features:
• Acrylic with fiberglass reinforcement
• Integral apron with removable access panel
• Integral 3-sided tile/water retention flange
• Form-fitted back rest
• Dual, molded in arm rests
• 1.25 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Eight multi-directional and flow-adjustable
jets including:
- Two foot jets
- Four body massage jets
- Two recessed back-rest jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Factory installed and tested whirlpool system
EverClean ® Whirlpool Massage featuring System I
❏ 2776.218WC Whirlpool featuring System I,
Left Hand Outlet
❏ 2776.118WC Whirlpool featuring System I,
Right Hand Outlet
• Same as above except with the EverClean ®
System
❏ 2776.102 Bathing Pool, Right Hand Outlet
❏ 2776.202 Bathing Pool, Left Hand Outlet
Nominal Dimensions:
1521 x 813 x 508mm
(59-7/8" x 32" x 20")
American Standard whirlpools and air baths with
EverClean
® incorporate a patented silver-ion
additive right into the circulation piping to protect
the pipes from mold, mildew, algae and fungus that
could cause deterioration or staining of the pipes.
To Be Specified - Required:
❏
Color:
❏ Bath Filler: (specify finish)
❏ Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
❏
Bath Caddie: 9533.100 (in Chrome only)
❏ Jet Trim Ring Kit: 9860.200-two per kit (specify finish)
For color/finish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS