Brother MFC-665CW - Manual (Page 72)

Wireless Configuration for Macintosh ®
65
5
j To communicate with the un-configured wireless machine, temporarily change the wireless settings on
your PC to match machine’s default settings shown on this screen. ClickNext.
k The following list appears. If the list is blank, check if the machine is powered on, and then click Refresh.
Choose the machine you wish to configure, and click Next.
Note
The Default Node name of the NC-xxxx (where “xxxx” is your model name) is “BRW_xxxxxx” (where
“xxxxxx” is the last six digits of Ethernet address).