Fagoting – Brother CS 80 User Manual
Page 95
Decorative Stitching 89
3
Fagoting
Stitching across an open seam is called “ fagoting” . It
is used on blouses and children's clothing. This stitch
is more decorative when thicker thread is used.
1
Use an iron to fold the two pieces of fabric
along their seams.
2
Baste the two pieces of fabric, separated by
about 4 mm (3/16 inch), onto thin paper or a
sheet of water-soluble stabilizer.
1 Thin paper or water soluble stabilizer
2 Basting stitching
3 4 mm (3/16 inch)
3
Attach zigzag foot “J”.
• For details, refer to “ Replacing the presser
foot” (page 35).
4
Select stitch
or
.
• For details, refer to “ Selecting stitching”
(page 58).
5
Set the stitch width to 7.0 mm (1/4 inch).
• For details, refer to “ Adjusting the stitch
width” (page 51).
6
Sew with the center of the presser foot
aligned along the center of the two pieces of
fabric.
7
After sewing is finished, remove the paper.
1
2
3
J
S2_brotherE.book Page 89 Thursday, February 13, 2003 11:03 AM