Brother SB4138 - Manual (Page 64)

SEWING BASICS
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
62
c
Press (Automatic reverse/reinforcement
stitch key).
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
X (Automatic reverse/reinforcement
stitch key) lights up, and the sewing machine
is set for automatic reverse/reinforcement
stitching.
• To turn automatic reverse/reinforcement
stitching off, press (Automatic reverse/
reinforcement stitch key) until the key is no
longer lit.
• When the sewing machine is turned off, the
automatic reverse/reinforcement stitching
setting is cancelled.
d
Position the fabric under the presser foot, and
then press (“Start/Stop” button) once.
a “Start/Stop” button
X After reverse/reinforcement stitches are
sewn, the machine starts sewing.
e
After reaching the end of the stitching, press
(“Reverse/Reinforcement Stitch” button)
once.
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
a “Reverse/Reinforcement Stitch” button
X After reverse/reinforcement stitches are
sewn, the sewing machine stops.
Memo
z Reverse/reinforcement stitches WILL NOT
be sewn until (“Reverse/Reinforcement
Stitch” button) is pressed. (“Start/Stop”
button) may be pressed to stop stitching
when needed such as for pivoting corners.
1
1