Brother SB4138 - Manual (Page 103)

Appliqué, Patchwork and Quilt Stitching 101
—— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
3
Appliqué stitching
For best results, use the included open toe foot.
a
Cut out the appliqué, leaving a seam
allowance of between 3 and 5 mm (1/8 and
3/16 inch).
a Seam allowance
b
Place a pattern made of thick paper or
stabilizer on the back of the appliqué, and then
fold over the seam allowance using an iron.
• Remove the thick paper after pressing the
seam allowance.
c
Turn the fabric over, and then baste or pin it
onto the fabric that it will be attached to.
a Basting stitching
d
Attach the open toe foot.
• For details, refer to “Replacing the presser
foot” (page 41).
e
Select a stitch.
• For details, refer to “Selecting stitching” (page
72).
f
Turn the handwheel toward you
(counterclockwise), and then begin sewing
around the edge of the appliqué, making sure
that the needle drops just outside of the
appliqué.
When sewing around corners, stop the
machine with the needle in the fabric just
outside of the appliqué, raise the presser foot
lever, and then turn the fabric as needed to
change the sewing direction.
1
1