Brother DCP-8110DN - Manual (Page 22)

Chapter 2
12
b
Pull out the MP tray support (1) and
unfold the flap (2).
c
Put paper in the MP tray and make sure:
 The paper stays under the maximum
paper mark (1).
 The side to be printed on must be
face up with the leading edge (top of
the paper) in first.
 The paper guides touch the sides of
the paper so it will feed correctly.
d
Lift up the support flap to prevent paper
from sliding off the face-down output
tray, or remove each page as soon as it
comes out of the machine.
1
2
1