Brother FAX-2440C - Manual (Page 81)

5 - 4 QUICK-DIAL NUMBERS AND DIALING OPTIONS
Setting up Groups for Broadcasting
(FAX-2440C only)
Groups, which can be stored on a One-Touch key or a Speed-Dial
location, allow you to send the same fax message to many fax
numbers by pressing only a One-Touch key and
Black Start or
Search/Speed Dial , # , the two-digit location and Black Start .
First, you will need to store each fax number as a One-Touch or
Speed-Dial number. Then, you can combine them into a Group,
Each Group uses up a One-Touch key or a Speed-Dial location.
Finally, you can have up to six small Groups, or you can assign up to
85 numbers to one large Group.
(See Storing Speed-Dial numbers on page 5-2 and Changing
One-Touch (FAX-2440C only) and Speed-Dial numbers on page
5-3.)
1
Press Menu/Set , 2 , 3 , 3 .
2
Decide where you wish to store the
Group.
—AND—
Press a One-Touch key.
—OR—
Press Search/Speed Dial and enter the two-digit location,
and then press Menu/Set .
3
Use the dial pad to enter the Group number (1 to 6).
Press Menu/Set .
(For example, press 1 for Group 1.)
4
To include One-Touch or Speed-Dial numbers in the Group,
enter them as follows.
For example, for One-Touch number 2 , press One-Touch key 2 .
For a number in a black square, such as One-Touch key ,
press Shift and One-Touch key .
For Speed-Dial location 09, press Search/Speed Dial , and
then press 09 on the dial pad. The LCD shows 02 , #09 (or
06 , #09 ).
Set Quick-Dial
3.Setup Groups