Brother MFC-J4710DW - Manual (Page 8)

8
6
Set the paper settings
(MFC-J4710DW)
For your machine to produce the best print quality and
to feed the correct paper size, the paper type and size
must be set to match the paper in the tray.
For details on the types and sizes of paper supported,
see Paper Size and Type in chapter 2 of the Basic
User’s Guide.
a
When Tray Setting appears on the
Touchscreen, press Tray Setting to set the
paper size and paper type.
b
Press Tray #1 to set paper size and paper
type for tray #1, or press Tray #2 to set paper
size for tray #2.
c
Press the size and type of paper you are using.
d
Press OK.
7
Review Touchscreen
display
The Touchscreen displays information on screen
operation and manual feed slot use. Review this
information and go to the next step. For details, see
the Basic User’s Guide.
8
Choose your language
(if needed)
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d
Swipe up or down, or press a or b to display
Local Language.
Press Local Language.
e
Press your language.
f
Press .
NOTE
You can change the default tray that the machine
will use for printing copies or received faxes. (See
Tray use in Copy mode or Tray use in Fax mode
in chapter 2 of the Basic User’s Guide.)