Brother MFC-J4710DW - Manual (Page 20)

20
Windows
® Wired Network
For wired network interface users
(Windows ® XP Home/XP Professional/Windows Vista ® /Windows ® 7)
18
Before you install
Make sure that your computer is ON and you are
logged on with Administrator rights.
19
Connect the network
cable
a
Lift the scanner cover until it locks securely into
the open position.
b
Connect the network cable to the Ethernet port
marked with a
symbol a. You will find the
Ethernet port inside the machine on the left, as
shown in the callout below. Remove the orange
protective cap before connecting the cable.
IMPORTANT
If there are any programs running, close them.
NOTE
• The screens may differ depending on your
operating system.
• The CD-ROM includes Nuance™ PaperPort™
12SE. This software supports Windows
®
XP
Home (SP3 or greater), XP Professional (SP3
or greater), XP Professional x64 Edition (SP2
or greater), Windows Vista
®
(SP2 or greater)
and Windows ® 7. Update to the latest
Windows
®
Service Pack before installing
MFL-Pro Suite.
• If you have previously set up your machine for
a wireless network and then want to set it up on
a wired network, you should check that the
machine’s Network I/F is set to
Wired LAN. The wireless network interface
will become inactive with this setting.
On your machine, press .
Press All Settings.
Press Network.
Swipe up or down, or press a or b to display
Network I/F.
Press Network I/F.
Press Wired LAN.
Press .
1