Brother 3034D - Manual (Page 9)

7
English
Trim trap
The optional trim trap holds the trimmed fabric and
thread produced when sewing.
To install:
Insert the trim trap until it contacts the front cover.
NOTE:
Be sure to position the positioning guide to the one
on the machine.
To remove:
Slowly pull out the trim trap.
NOTE:
The optional trim trap can also be used as the foot
controller holder.
CAUTION
Always remove the foot contrller from the trim trap
when carrying the machine.
Free-arm sewing (removing bed extension)
Free-arm sewing enables tubular pieces to be sewn
more easily.
1. Remove the bed extension .
NOTE:
Be careful not to lose the removed bed extension.
2. Position the fabric, and start sewing. (See
CHAPTER 5.)