Important safety instructions, Danger, Warning – Brother 3034D User Manual
Page 2: Caution
IMPORTANT SAFETY INSTRUCTIONS
When using the sewing machine, basic safety precautions should always be followed, including the following.
Read all instructions before using.
DANGER
To reduce the risk of electric shock.
1. The sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the electrical outlet
immediately after using and before cleaning.
2. Always unplug before replacing the light bulb. Replace the light bulb with same type rated 15 watts.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons.
1. Do not allow to be used as a toy. Close attention is necessary when the sewing machine is used by or near children.
2. Use this sewing machine only for its intended use as described in this manual. Use only accessories recommended by the manufacturer as
contained in this manual.
3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or
dropped into water. Return the sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or
mechanical adjustment.
4. Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot controller free
from the accumulation of lint, dust, and loose cloth.
5. Never drop or insert any object into any openings.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. To disconnect, turn the main switch to the symbol "O" position which represents off, then remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14. Switch the sewing machine to the symbol "O" position when making any adjustments in the needle area, such as threading needle,
changing needle, or changing presser foot, etc.
15. Always unplug the sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing
adjustments mentioned in the instruction manual.
16. This sewing machine is not intended for use by young children or infirm persons without supervision.
17. Young children should be supervised to ensure that they do not play with this sewing machine.
18. Do not disassenble the machine.
CAUTION
To use the machine safely
1. This appliance has a polarized plug (one blade wider than the other) to reduce the risk of electric shock, this plug is intended to fit in a
polarized outlet only one way. (For U.S.A. only)
2. If the plug does not fit fully in the outlet, reverse the plug. (For U.S.A. only)
3. If it still does not fit. Contact a qualified electrician to install the proper outlet.
4. Do not modify the plug in any way.
5. Make sure you watch the needles carefully while you are sewing. Do not touch the hand wheel, needles, knives, or other moving parts.
6. Turn off the main power and unplug the cord in the following circumstances:
- When you have stopped using the machine
- When you are replacing or removing the needle or any other part
- If there is a power failure while you are using the machine
- If you are checking or cleaning the machine
- Leaving the machine unattended
7. Do not store anything on the foot controller.
8. Fully plug the machine directly into the wall. Do not use extension cords.
9. If water is dropped on the machine, unplug the machine immediately, and contact your local authorized dealer.
10. Do not put furniture on the cord.
11. Do not bend the cord, or pull on the cord to unplug.
12. Do not touch the cord with wet hands.
13. Place the machine near to the wall outlet.
14. Do not place the machine on an unstable surface.
15. Do not put on the soft cover.
16. If you notice any abnormal sound or condition, consult your local authorized dealer.