Brother 3034D - Manual (Page 29)

27
English
CHAPTER 7
MAINTENANCE
Changing the light bulb
CAUTION
Turn off the main power and light switch and
unplug the machine before you change the light
bulb. If the main power and light switch is on
when you change the light bulb, you may get an
electric shock. If the machine is on and you step
on the foot controller, you may be injured.
To avoid burns, let the light bulb cool down before
you change it.
1. Loosen the screw with a cross slot screwdriver,
and then remove the lamp cover.
2. Replace the light bulb with a new one.
Parts code of the light bulb:
X53061050 (U.S.A., CANADA)
205336050 (OTHERS)
3. Close the lamp cover and tighten the screw.
Cleaning
CAUTION
Turn off the machine before cleaning.
Turn the hand wheel and move the needles down.
Periodically clean dust, trimmed fabric and thread
with the included cleaning brush.
Oiling
For smooth and silent operation, the moving parts
(indicated with arrows) of the machine should be
oiled periodically.
CAUTION
Turn off the machine before opening the front
cover and oiling.
NOTE:
Be sure to oil your sewing machine before use.
Always clean the lint off your machine before you apply
oil.
Oil the machine once or twice a month for normal use. If
the machine is used more often, oil it once a week.