Brother Innov-i - Manual (Page 110)

UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
108
e
Start sewing.
Partially removing threads is called “drawnwork”.
This gives a beautiful result with fabrics that have a
loose weave.
Two ways to create drawnwork are described below.
■ Drawnwork (Example 1)
a
Pull out several threads from the fabric.
b
Turn on the sewing machine.
c
Select stitch
36
.
• For details, refer to “Selecting stitching” (page
67).
d
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
foot” (page 41).
e
With the right side of the fabric facing up, sew
along the right edge of the frayed section.
f
Press (Settings key) in the operation
panel.
X The settings screen appears.
g
Press or (Stitch length keys) until
is displayed.
X
9
The screen for mirror imaging the pattern
appears.
N