Brother QL-720NW - Manual (Page 40)

32
This section explains how to install BRAdmin Light and P-touch Editor Lite LAN.
„ Installing the BRAdmin Light
configuration utility
„ Setting your IP address,
Subnet Mask and Gateway
using BRAdmin Light
6 Installing and using other software
BRAdmin Light (Windows
®
)
1
Click [Network Utility].
This screen is the same
screen as you see when you
insert the CD-ROM.
2
Click [BRAdmin Light] and
follow the onscreen
instructions.
If the Windows
®
Firewall is
enabled on your PC, the
message "Do you wish to add
this application to the list of
exceptions?" appears. Check
your PC environment and
choose [Yes] or [No].
1
Click [Start]-[All
Programs]-[Brother]-
[BRAdmin Light]-
[BRAdmin Light].
BRAdmin Light will search for new
devices automatically.
If you have a DHCP/BOOTP/
RARP server in your network,
you don’t have to do the
following operation. Because
the print server will
automatically obtain its IP
address.
2
Double-click the
unconfigured device.
The default password is
"access."