Brother HL-L8350CDWT - Manual (Page 104)

General Information
97
3
Network for HL-L8350CDW and HL-L8350CDWT
Submenu 1 Submenu 2 Menu Selections Options Descriptions
Wired LAN
(HL-L8350CDW
and
HL-L8350CDWT) TCP/IP Boot Method Auto* / Static / RARP /
BOOTP / DHCP Chooses the IP method
that best suits your
needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*
1
Enter the Gateway
address.
IP Boot Tries 0 / 1 / 2 / 3* / ... / 32767 Specifies the number of
attempts the machine
will try to obtain an IP
address when the Boot
Method is set to any
setting except Static.
APIPA On* / Off Automatically allocates
the IP address from the
link-local address
range.
1
IPv6 On / Off* Enables or disables the
IPv6 protocol.
Ethernet - Auto* / 100B-FD /
100B-HD / 10B-FD /
10B-HD Chooses Ethernet link
mode.
Wired Status - Active 100B-FD /
Active 100B-HD /
Active 10B-FD /
Active 10B-HD /
Inactive / Wired OFF Displays Ethernet link
status.
MAC Address - - Displays MAC address
of the machine.
Set to Default Restores wired network settings of the internal print server to the factory
settings.
Wired Enable - On* / Off Chooses Ethernet link
mode.
The factory settings are shown in Bold with an asterisk.