Brother HL-L8350CDWT - Manual (Page 94)

General Information
87
3
LED indications
3
The LEDs are lights that show the machine's status.
Machine status messages
3
The following table explains the machine's status messages during normal operation:
Data LED (Green)
LED indication Meaning
On Data is in the machine's memory.
Blinking The machine is receiving or processing data.
Off There is no remaining data in the memory.
Error LED (Orange)
LED indication Meaning
Blinking There is a problem with the machine.
Off There is no problem with the machine.
Machine Status Message Meaning
Cooling Down The machine is cooling down.
Cancel Printing The machine is canceling the job.
Calibrate The machine is calibrating the color density.
Ignore Data The machine is ignoring data processed using the PS driver.
Please Wait The machine is warming up.
The machine is performing the calibration process.
Printing The machine is printing.
Ready The machine is ready to print.
Sleep In Sleep mode (power save mode) the machine acts as though it were turned
off, but the machine can still receive data. Receiving a print job will wake up
the machine to start printing.
Deep Sleep In Deep Sleep mode (reducing more power consumption than Sleep mode),
the machine acts as though it were turned off. If the machine does not receive
data for a certain length of time while it is in Sleep mode, it enters Deep Sleep
mode. The machine will wake up when the machine receives a print job.
Registration The machine is adjusting the print position.