Brother MFC J5910DW - Manual (Page 19)

19
Windows
® Wired Network
Window
s
®
Macintosh
Wired Network
For wired network interface users
(Windows ® XP Home/XP Professional/Windows Vista ® /Windows ® 7)
17
Before you install
Make sure that your computer is ON and you are
logged on with Administrator rights.
18
Connect the network
cable
a
Lift the scanner cover until it locks securely into
the open position.
b
You will find the Ethernet port marked with a
symbol inside the machine on the left as
shown below. Remove the protective cap and
connect the network cable to the Ethernet port.
IMPORTANT
If there are any programs running, close them.
Note
• The screens may differ depending on your
operating system.
• The CD-ROM includes ScanSoft™
PaperPort™12SE. This software supports
Windows
® XP Home (SP3 or greater), XP
Professional (SP3 or greater), XP Professional
x64 Edition (SP2 or greater), Windows Vista
®
(SP2 or greater) and Windows ® 7. Update to
the latest Windows
®
Service Pack before
installing MFL-Pro Suite.
• If you have previously set up your machine for
a wireless network and then want to set it up on
a wired network, you should check that the
machine’s Network I/F is set to
Wired LAN. The wireless network interface
will become inactive with this setting.
On your machine, press Menu.
Press s or t to display Network, and then
press Network.
Press s or t to display Network I/F, and
then press Network I/F.
Press Wired LAN.
Press Stop/Exit.
USB