Brother MFC-J245 - Manual (Page 34)

Chapter 4
22
f
When the LCD asks you Next Page?,
do one of the following:
 To send a single page, press 2 to
choose No(Dial) (or press
Black Start again).
The machine starts sending the
document.
 To send more than one page, press
1 to choose Yes and go to step g.
g
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
h
After all the pages have been scanned,
press 2 or Black Start to start.
Stop faxing
4
To stop faxing, press Stop/Exit.
Setting scanner glass size for
faxing
4
When documents are A4 size, you need to
set the Scan Size to A4. If you do not, the
bottom portion of the faxes will be missing.
a
Load your document.
b
Press (FAX).
c
Press Menu, 3, 2, 0.
d
Press a or b to choose Letter or A4.
Press OK.
e
Press Stop/Exit.
f
Enter the fax number.
g
Press Black Start or Color Start.
NOTE
This setting is only available for sending
documents from the scanner glass.
Color fax transmission
4
Your machine can send a color fax to
machines that support this feature.
Color faxes cannot be stored in the machine’s
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).
Canceling a fax in progress
4
If you want to cancel a fax while the machine
is scanning, dialing or sending, press
Stop/Exit.