Troubleshooting and routine maintenance 5 - 8 – Brother DCP-110C User Manual

Page 75

TROUBLESHOOTING AND ROUTINE MAINTENANCE 5 - 8

Software Difficulties

Cannot install software or print

Run the Repair MFL-Pro Suite program on the CD-ROM. This program
will repair and reinstall the software.

‘Device Busy’

Make sure the DCP is not showing an error message on the LCD.

PhotoCapture Center

™

Difficulties

Removable Disk does not
work properly.

a) Have you installed the Windows

2000 update?

If not, do the following:
1. Disconnect the USB cable.
2. Install the Windows

2000 update. Please see the Quick Setup

Guide. After the installation the PC will be automatically restarted.
3. Wait about 1 minute after you reboot the PC, and then connect the
USB cable.

b) Take out the media card and put it back in again.
c) If you have tried "Eject" from within Windows

, you must take out the

media card before you continue.

d) If an error message appears when you try to eject the media card, it

means the card is being accessed.
Wait a while and then try again.

e) If all of the above do not work, please turn off your PC and DCP, and

then turn them on again.
(You will have to unplug the power cord of the DCP to turn it off.)

Cannot access Removable
Disk from Desktop icon.

Make sure you have inserted the media card into the media slot.

Other Difficulties

Incorrect LCD language

DIFFICULTY

SUGGESTIONS