Brother MW-120 - Manual (Page 34)

32
„
Screen capture settings
The time until the data is imported and the size of the cap-
tured area can be specified.
1
Tap on the tool-
bar.
→ The Screen capture print
settings screen appears.
2
The following text set-
tings can be speci-
fied.
• Capture delay time:
0 to 10 seconds
Specifies the length of
time until the image is
imported after is
tapped.
• Capture range:
Selection range (Use
the stylus to select the
desired area.)/Client
(Area indicated by
in the illustration at the
right)/Desktop (Entire
screen)
3
Tap .
→ The screen capture settings are applied.
ok button