Brother DCP-395CN - Manual (Page 7)

7
6
Choose your language
(if needed)
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
7
Set the LCD contrast
(if needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a
Press Menu.
b
Press a or b to choose General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose LCD Contrast.
e
Press d or c to choose Light, Med or Dark.
Press OK.
f
Press Stop/Exit.
Note
You can also adjust the angle of the display by
lifting it.