Brother MFC-8870DW - Manual (Page 8)

Setting Up the Machine
6
STEP 1
3 Release the scanner lock
1
Push the lever (1) in the direction shown to
unlock the scanner.
(The gray scanner lock lever is located at the
back left side, under the document cover (2).)
4 Install the power cord and
phone line
1
Make sure that the machine power switch is off.
Connect the AC power cord to the machine.
2
Plug the AC power cord into an AC outlet. Turn
the power switch on.
Note
If Scanner Locked appears on the LCD,
immediately release the scanner lock and press
Stop/Exit. (See “3. Release the scanner lock.”)
3
Connect one end of the telephone line cord to
the jack on the machine marked LINE and the
other end to a modular wall jack.
(1)
(2)