Brother QL-500 User Manual

Page 21

For details on software, see the P-touch Editor Help.

After restarting the computer,

connect your printer to the

computer by using the USB cable,

and then turn on the printer.

•

Before connecting the USB interface
cable, remove the caution label
affixed to the USB port of the
machine.

•

If you are connecting the printer to
Macintosh

via a USB hub, it may not be detected correctly. If so, connect the

printer directly to the USB port on Macintosh

For Mac OS

X 10.3.9 - 10.4.x

Double click the drive where Mac OS

X is installed, and click in order of

[Applications] - [Utilities] - [Printer Setup Utility].

For Mac OS

X 10.5.x-10.6

Click in order of [Apple menu] - [System Preferences], and click [Print & Fax].

For Mac OS

X 10.3.9 - 10.4.x

Click [Add] and choose USB at the top of the screen.

Choose "QL-XXX" from the list and click [Add] again to add the printer to the

"Printer List".

For Mac OS

X 10.5.x - 10.6

Choose "QL-XXX" from the list and click [Add] /

to add the printer to the "Printer

List" / "Print & Fax".

When the screen returns to [Printer List / Print & Fax] screen, check that

"QL-XXX" is added, and close the [Printer List / Print & Fax] screen.

Now you can use the machine.

USB cable

Power cord

USB port

Power port