Brother MFC-8710DW - Manual (Page 9)

6
3
3
After you configure the Scan to FTP settings, you can use the Scan to FTP feature.
Scan to FTP using Scan to FTP Profiles for 5-line LCD models
3
a Load your document.
b Press (SCAN).
c
Press a or b to choose Scan to FTP. Press OK.
(For DCP-8155DN, MFC-8520DN, MFC-8810DW and MFC-8910DW) Go to step d.
(For DCP-8110DN, DCP-8150DN, MFC-8510DN and MFC-8710DW) Go to step e.
d
Press a or b to choose 1sided, 2sided (L)edge or 2sided (S)edge.
Press OK.
e
Press a or b to choose one of the profiles listed.
Press OK.
 If the profile is complete, you will automatically go to step j.
 If User Select was configured using Web Based Management, you will be prompted to choose the
scan quality, file type and file size from the control panel.
 If the profile is not complete, for instance, the quality or file type are not chosen, you will be prompted
to enter any missing information in the following steps.
f Choose one of the options below:
 Press a or b to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Color Auto
, Gray 100 dpi, Gray 200 dpi, Gray 300 dpi or Gray Auto. Press OK and go
to step g.
 Press a or b to choose B&W 300 dpi, B&W 200 dpi or B&W 200x100 dpi. Press OK and go to
step h.
g Press a or b to choose PDF, PDF/A, Secure PDF, Signed PDF, JPEG or XPS. Press OK and go to step
i
.
Machine operation
3