Brother MFC-8710DW - Manual (Page 12)

9
Machine operation
3
Scan to FTP using Scan to FTP Profiles for DCP-8250DN and
MFC-8950DW(T)
3
a Load your document.
b Press Scan.
c Press Scan to FTP.
d Press a or b to choose one of the profiles listed.
 If the profile is complete, you will automatically go to step j.
 If User Select was configured using Web Based Management, you will be prompted to choose the
scan quality, file type and file size from the control panel.
 If the profile is not complete, for instance, the quality or file type are not chosen, you will be prompted
to enter any missing information in the following steps.
e
Press Quality and then choose one of the options below:
 Press d or c to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Color Auto
, Gray 100 dpi, Gray 200 dpi, Gray 300 dpi or Gray Auto. Go to step f.
 Press d or c to choose B&W 300 dpi, B&W 200 dpi or B&W 200x100 dpi. Go to step g.
f
Press File Type and then choose PDF, PDF/A, Secure PDF, Signed PDF, JPEG or XPS.
Go to step h.
g
Press File Type and then choose PDF, PDF/A, Secure PDF, Signed PDF, or TIFF. Go to step h.
Note
• If you choose Secure PDF, the machine will ask you to enter a 4 digit password using numbers 0-9 before
it starts scanning.
• If you choose Signed PDF, you must install and then configure a certificate to your machine using Web
Based Management.
h If you are using the scanner glass, press Glass Scan Size.
Press to choose A4, Letter or Legal/Folio for the scanner glass setting and then choose one of the
options below:
 If you choose color or gray for the quality in step e, go to step i.
 If you choose black and white for the quality in step e, go to step j.