Brother HL-6180DWT - Manual (Page 14)

11
Configuration methods
2
One push configuration using WPS (Wi-Fi Protected Setup)
2
If your mobile device supports WPS (PBC; Push Button Configuration), you can configure a Wi-Fi Direct
network by following these instructions.
a
Press Menu.
b Press a or b to choose Network.
Press OK.
c
Press a or b to choose Wi-Fi Direct.
Press OK.
d
Press a or b to choose Group Owner and then press OK.
e
Press a or b to choose On and then press OK.
f
Press a or b to choose Push Button.
Press OK.
g
When Wi-Fi Direct On? is displayed, press a or b to choose On and then press OK.
To cancel, press a or b to choose Off and then press OK.
h
When Other Network I/F will be disabled. Do you want to continue? is displayed,
press 1 to accept.
To cancel, press 2.
i When Activate Wi-Fi Direct on other device. is displayed, activate your mobile device's
WPS one push configuration method (see your mobile device's user's guide for instructions) and then
press OK on your machine. This will start the Wi-Fi Direct setup.
To cancel, press Clear.
j
If your mobile device connects successfully, the machine shows Connected.
You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device
or scanning to your mobile device, you can download the Mobile Print/Scan Guide for Brother
iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/).
If the connection failed, see Troubleshooting uu page 21.