Brother Fax 1360 - Manual (Page 53)

Dialing and storing numbers
39
8
Setting up Groups for
broadcasting
8
If you regularly want to send the same fax
message to many fax numbers you can set
up a Group. Groups are stored on a
One-Touch key or a Speed-Dial number.
Each group uses up a One-Touch key or a
Speed-Dial location. You can then send the
fax message to all the numbers stored in a
Group just by pressing a One-Touch key or
entering a Speed-Dial number, and then
pressing Start.
Before you can add numbers to a Group, you
need to store them as One-Touch or
Speed-Dial numbers. You can have up to six
small Groups, or you can assign up to 99
numbers to one large Group.
a
Press Menu, 2, 3, 3.
3.Setup Groups
b
Choose an empty location where you
want to store the Group in one of the
following ways:
„ Press a One-Touch key.
„ Press Search/Speed Dial and enter
a two-digit location.
Press OK.
c
Use the dial pad to enter a Group
number (1 to 6).
Press OK.
Setup Group:G01
d
To add One-Touch or Speed-Dial
numbers follow the instructions below:
„ For One-Touch number 6, press
One-Touch key 6.
„ For Speed-Dial location 09, press
Search/Speed Dial and then press
0 9 on the dial pad.
The LCD will display your chosen
One-Touch numbers with a l, or
Speed-Dial numbers with a # (for
example l06, #09).
G01:
l06 #09
e
Press OK when you have finished
adding numbers.
f
Use the dial pad to enter a name for the
Group.
Press OK.
g
Press Stop/Exit.
Note
You can easily print a list of all your
Quick-Dial numbers. Numbers that are
part of a group will be marked in the
GROUP column. (See How to print a
report on page 46.)
Dialing access codes and
credit card numbers
8
You can combine more than one Quick-Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate long distance carrier.
For example, you might have stored ‘555’ on
Speed-Dial #03 and ‘7000’ on Speed-Dial
#02. You can use them both to dial ‘555-7000’
if you press the following keys:
Search/Speed Dial, #03,
Search/Speed Dial, #02, and Start.
Numbers can be added manually by entering
them on the dial pad:
Search/Speed Dial, #03, 7, 0, 0, 1 (on the
dial pad), and Start.
This would dial ‘555-7001’. You can also add
a pause by pressing the Redial/Pause key.