Brother Pocket Jet6 w BT PJ-662 - Manual (Page 6)

5
En
g
lis
h
1 Print surface
f
If necessary, change the print settings
using either the printer driver or PJ-600
Series Utility.
g
Click [Print] in the computer program’s
menu.
The DATA indicator blinks in green to
indicate that the printer is receiving data,
and the document is printed.
h
Turn the printer off by pressing the
(Power) button quickly two times. The
POWER indicator turns off.
Note
• If paper is loaded and the DATA indicator
remains green without blinking, the printer
has not received enough data to print an
entire page. Press and hold the
(Feed) button to print and eject the
page.
• If you load paper before you start the print
job, you will have time to adjust the paper.
If the paper is skewed after the printer
pulls it into the starting position, open the
release cover completely, remove the
paper, and then close the cover and load
the paper again.
Accessing the User’s
Guide and P-touch
®
Editor Software User’s
Guide
The User’s Guide and P-touch ® Editor
Software User’s Guide (PJ-623/663 only) can
be found on the setup CD-ROM.
You can access these documents by
selecting the desired document on the top
menu screen which appears automatically
after you insert the CD-ROM into your
computer.
1