beautypg.com

Saving patterns, Retrieving a pattern – Brother NX-800 User Manual

Page 132

background image

UTILITY STITCHES

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

130

Saving patterns

Combined patterns can be saved for later use. Since
saved patterns are not lost after the sewing machine is
turned off, they can be retrieved at any time. This is
convenient for patterns, such as names, that will be
used often. Utility stitches can also be saved. Up to
ten patterns can be saved.

a

Create the combined pattern that you wish to
save. Otherwise, display the pattern to be
saved.

• For details, refer to “Combining patterns”

(page 123).

b

Press

(Memory key) in the operation

panel.

X

The machine enters pattern memory mode,

and

appears in the upper-left corner of

the screen.

c

Press the numeric key (0 through 9) for the
pocket where the pattern is to be saved.

X

The saved contents of the pocket for the
selected number are displayed.

• If nothing has been saved, nothing appears in

the bottom of the screen.

• If the pocket contains a pattern, the pattern is

displayed. To leave this pattern in the pocket,
select a different pocket.

d

Check the contents, and then press

(OK

key).
The contents saved in the selected pocket are
overwritten.

X

“Saving...” appears while the pattern is being
saved in the pocket.

X

After the pattern is saved, a beep is sounded,
and the initial stitch screen appears again.

Note

z Do not turn off the sewing machine while a

pattern is being saved, otherwise the pattern
data may be lost.

Memo

z The pattern saved in the pocket can be

erased by performing the save operation

with no pattern selected.

Retrieving a pattern

a

Press

(Preset

utility

stitch/saved pattern

key) in the operation panel.

X

After

appears in the center of the screen,

the machine enters retrieve pattern mode,

and

appears in the lower-left corner of

the screen.

Memo

z Each time

(Preset utility stitch/saved

pattern key) is pressed, the machine switches

between the preset utility stitch mode and

the saved pattern mode. (For details on the

preset utility stitch mode, refer to “Selecting

stitch types and patterns” (page 70).

This manual is related to the following products: