Brother NX-800 - Manual (Page 116)

UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
114
h
Press (“Reverse/Reinforcement Stitch”
button).
Press and hold the
(“Reverse/
Reinforcement Stitch”) button pressed until the
stitching reaches the upper-left corner.
X The fabric is fed forward.
i
After you have sewn to the corner, stop the
sewing machine, and then select stitch
69
.
j
Start sewing.
X The fabric is fed to the left.
k
After you have sewn to the corner, stop the
sewing machine, and then select stitch
01
again.
l
After sewing 3 to 5 stitches at the beginning of
the stitching, stop the sewing machine.
Memo
z The feeding direction of the fabric differs
depending on the stitch that is selected. Be
sure to guide the fabric while it is sewn.