Brother MFC-3320CN - Manual (Page 29)

3 - 6 FRONT PANEL SETUP
NC9100h_FM6.0
Gateway
This field displays the current gateway or router address used by the
machine. If you are not using DHCP or BOOTP to obtain the gateway
or router address, enter the address you wish to assign. If you do not
have a gateway or router, leave this field blank. Check with your
network manager if you are unsure.
1 Press Menu/Set , 5 , 1 , 4 .
2 Select 1 to change. Enter the Gateway address.
3 Press Menu/Set .
4 Press Stop/Exit .
Host Name
You can register the machine name on the Network. This name is
often referred to as a NetBIOS name; it will be the name that is
registered by the WINS server on your network. Brother
recommends the name BRN_XXXXXX (where XXXXXX is the last
six digits of the Ethernet address) (up to 15 characters).
1 Press Menu/Set , 5 , 1 , 5 .
2 Select 1 to change. Enter the Host Name.
3 Press Menu/Set .
4 Press Stop/Exit .
WINS Config
This selection controls how the machine obtains the IP address for
the WINS Server.
1 Press Menu/Set , 5 , 1 , 6 .
2 Press or to select Auto or Static .
3 Press Menu/Set .
4 Press Stop/Exit .