Brother NX-200 - Manual (Page 54)

SEWING BASICS ———————————————————————————————————————————————————
48
3
Position the fabric under the presser foot, and
then press
(start/stop button) once.
1 Start/stop button
X After reverse/reinforcement stitches are
sewn, the machine starts sewing.
4
After reaching the end of the stitching, press
(reverse/reinforcement stitch button)
once.
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
1 Reverse/reinforcement stitch button
X After reverse/reinforcement stitches are
sewn, the sewing machine stops.
Memo
● Reverse/reinforcement stitches will not be
sewn if the start/stop button is pressed at the
end of the stitching. Be sure to press the
reverse/reinforcement stitch button at the
end of the stitching.
1
1