Brother NX-200 - Manual (Page 40)

GETTING READY ———————————————————————————————————————————————————
34
4
Turn the screw at the bottom of the legs to
adjust their height.
5
When you are finished using the wide table,
remove it.
While slightly lifting up the wide table, pull it
off to the left.
6
Install the flat bed attachment back in its
original position.
Memo
● With the legs folded up, the wide table can
be stored attached to the hard case.
● Do not move the sewing machine while
the wide table is attached, otherwise
damage or injuries may occur.
CAUTION