Brother DCP-130C - Manual (Page 6)

Setting Up the Machine
4
STEP1
1
1 Removing the protective
parts
1
Remove the protective tape and film covering
the scanner glass.
Improper Setup
DO NOT connect the USB cable. Connecting
the USB cable is done during the software
installation process.
2 Loading paper
You can load up to 100 sheets of 20 lb
(80 g/m
2
) paper.
For details, see About paper in Chapter 2 of
the User’s Guide.
1
Pull the paper tray completely out of the
machine and lift the output paper tray cover (1).
2
Press and slide the paper side guides (1) and
paper length guide (2) to fit the paper size.
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Gently put the paper into the paper tray print
side down and top edge first.
Check that the paper is flat in the tray.
1
1
2